Copyright 2018 Robert Clark
The worldwide space community was amazed by the success at which SpaceX was able to launch the Falcon Heavy and land the two side boosters back at the launch site:
SpaceX Falcon Heavy Test Flight - Launch and Landing.
This led the current head of ESA Jan Woerner to suggest that ESA should promote reusability for future launchers. But, Woerner argues, the currently planned version of the Ariane 6 using two solid side boosters and with no reusability is so far along it should probably be completed:
Posted on 11/02/2018 by Jan Woerner
EUROPE’S MOVE, PART 2.
Posted on 15/02/2018 by Jan Woerner
However SpaceX is progressing so rapidly with reusability, and reduced costs, that by the time the Ariane 6 is expected to reach full operation in 2023 it's high cost may make it obsolete.
But in fact a faster, and much cheaper alternative is possible for the Ariane 6 that would have also have the advantage it could be made reusable: and that is to give the Ariane 5 core an additional Vulcain 2 engine so it can lift off without needing the solid side boosters.
Based on how much it cost JAXA to add a second cryogenic engine to the H-IIA core this could be done for only a $200 million development cost:
This is compared to the multibillion dollar development cost for the Ariane 6 version with side boosters.
I had previously written about the possibility of giving the Ariane 5 a second Vulcain engine here:
The Coming SSTO's: multi-Vulcain Ariane.https://exoscientist.blogspot.com/2013/03/the-coming-sstos-multi-vulcain-ariane.html
However, that was in the context of producing a SSTO. But SSTO's are still controversial. And in any case it would have a lower payload capacity than the solid booster version of the Ariane 6, and couldn't, in itself, fulfill the important role of launching GEO satellites.
So I'll discuss the case of giving the Ariane 5 core a second Vulcain engine while keeping an upper stage. I was surprised that my calculation showed this version without side boosters was able to get close to the 6.5 ton to GTO requirement ESA set for the Ariane 6 just with the two liquid stages, no solid side boosters.
This article discussed the various options that were being considered for the Ariane 6 including a version that added a second Vulcain engine to the Ariane 5 core:
CNES, ASI Favor Solid-Rocket Design For Ariane 6.
By Amy Svitak
Source: Aviation Week & Space Technology
October 15, 2010
You see it only lists 2,200 kg to GTO with the two stage H2C all-liquid configuration of the Ariane 6.
And even more surprisingly, my calculation shows my two-stage version could get the high GTO payload without using the expensive new upper stage being planned for the Ariane 6 with the new Vinci engine. It could do it with an already existing cryogenic Ariane H10 upper stage.
This indicates why the development cost for this version would be so low: no new solids need be developed, already existing Vulcain 2 engines are used, no new expensive upper stage and Vinci upper stage engine need be developed, and already existing Ariane upper stages are used.
I'll use Dr. John Schilling's launch performance calculator to estimate the payload possible:
Launch Vehicle Performance Calculator.
Use publicly available sources for the specifications of the Ariane 5G core, Vulcain 2 engine, and Ariane H10 upper stage to enter in data into the Schilling calculator. The calculator takes the vacuum values for the Isp and thrust even for first stage engines, since it already takes into account the diminution of these values at sea level. Then with two Vulcain engines the input page looks like this:
Some quirks of the Schilling calculator you need to be aware of though if you use it. First, always select "No" for the "Restartable Upper Stage" option, otherwise the payload will be reduced. Second, always set the "Inclination" to match the launch site latitude otherwise the payload will be reduced.
Note that while the thrust indicated for the first stage at 2,700 kilonewtons (vacuum) is well above the rocket gross mass, the sea level thrust for the two Vulcains is about 190,000 kilogram-force. With payload, this would not be enough to lift off. A couple of solutions. One would be to change the mixture ratio at lift off to increase the oxidizer to fuel ratio. This decreases Isp, but increases thrust. Another possibility is that liquid fuel engines can be run at some percentage above their rated values. For instance the space shuttle main engines could be run at 9% above their rated thrust values and the latest version of the SpaceX Merlin engines run at about 15% above the Merlins rated thrust value. Another possibility would be to reduce the propellant load. I'll look at this last solution in a moment.
In any case with these specifications the calculator gives this payload to LEO:
Now to get the GTO payload, change the "Apogee" entry from 185 km to 35,000 km. Then the calculator gives the result:
Altitude Compensation case.
We can get even better performance by using altitude compensation on the Vulcains. As discussed on this blog various methods exist to give standard bell nozzle engines, altitude compensating nozzles. These new additions would not be heavy or expensive.
As shown by the RL10-B2 engine, with a nozzle extension a hydrogen-fueled engine can get a vacuum Isp in the range of 465 s. So change the first and second stage Isp's to 465 s and increase the vacuum thrust proportionally. Then the payload for the LEO case would be:
And the payload to GTO would be:
This indicates the importance of altitude compensation even for multi-stage vehicles. The payload can be increased in the range of 25%. However, it could be argued the Schilling calculator was not formulated to deal with the altitude compensating case, so these estimates are less reliable. A legitimate concern. Accurate trajectory simulations need to be done to determine if altitude compensation can really increase payload to this extent even with multi-stage rockets.
Reduced Propellant Case.
As mentioned above another method to deal with the lift off thrust not being able to loft the rocket with payload, is to reduce the propellant load. In fact the currently adopted version of the Ariane 6 is planned to reduce the propellant on the core down to 140,000 kg.
If we do this to our all liquid version, this brings the LEO payload to 10,430 kg and the GTO payload to 4,890 kg.
And with the altitude compensation, the LEO payload comes to 12,800 kg and alt. comp. GTO payload to 6,370 kg.
And Yet Even More.
Beyond the importance of giving Europe a reusable, low cost launcher, there is also the fact that being all liquid-fueled, no solid motor boosters, Europe now would have an orbital launcher that could be used for manned spaceflight. Europe would finally have its own independent manned spaceflight capability.
I am confused with regards to your mentions of reusability. As far as I know, every part of the Ariane rockets is expended, and the addition of another engine will not change this fact.
Could you clarify this point?
The intention was to get the Ariane 5 core to be able to lift off on its own without side boosters. Then it could do a powered landing like the F9 does.Delete
It’s a fact that most liquid fueled engines are reusable to some degree. For instance while they are undergoing testing they are fired multiple times. Maintenance after each flight would extend the number of firings possible.
could there be a Ariane first stage to orbit as a space station component?ReplyDelete
Like the idea. It would create a large volume as a space station.Delete
By the way, there is another quite key advantage of SSTO's that is not well known. The fact that once in low Earth orbit, after it is refueled in orbit, it can make the full round trip of a Moon landing mission. See for example here:
Halfway to Anywhere: Achieving America's Destiny in Space.
"...an SSTO that is refueled in orbit has the capability to fly to the Moon, land, lift off, and fly back without additional refueling."
Halfway to Anywhere: Achieving America's Destiny in Space, p. 220.